Installation and Care >>

Resistance to Chemicals :

Royal House products are normally resistant to mild diluted acids and alkalis. However, the surface must be cleaned immediately if concentrated acids or alkalis spill.

Installation :

  • Ensure sub floors are smooth, dry, clean and structures sound.

  • We recommend Fevicol SR 998/SR 505 / Dunlop S-758 or equivalent rubber based adhesive for laying.

  • For a clean room condition, seam welding is recommended.

  • A colour control precaution: To minimize the risk of shade variation in colours, do not mix batch numbers.

  • In addition to the above, as far as Antistat is concerned, certain additional directions need to be followed.

    1. A network of copper strip underneath Antistat Flooring with proper earthing is recommended.

    2. For clean room conditions, PVC cord thermo welding is recommended.

For more details contact us or an authorized dealer.

Care :

Do's :

  • Royal House Flooring can be cleaned daily with a damp mop and weekly or fortnightly with a mild soap solution.

  • Severely soiled or floors with stubborn stains can be cleaned with the use of a coir brush or fine steel wool no. 000 soaked in warm soap solution to clean the affected area.

  • Clear water mopping is necessary to remove chemical spillage on the flooring and after scrubbing operation to remove residue.

    •

Dont's:

  • Do not throw lit cigarette butts or match sticks on the floor.

  • Avoid dragging heavy furniture / objects to prevent scratches.

  • Application of wax polish or floor finish should never be used as it will build up an insulating film on the surface.

    •